Basic B18
Rope clamp without handle
- Compact and lightweight rope clamp.
- Multi-purpose: ascending a rope, self-belaying on a fixed rope, as a progress capture device in hauling systems etc.
- Lower hole for connecting a lanyard.
- The upper holes allow a carabiner to be clipped so the rope clamp can be used for self-belaying or with hauling systems.
For single ropes between 8 and 13 mm in diameter.
Croll B16
Chest ascender
- Used with the ASCENSION handle for rope ascents.
- Thum b catch can be pinched for easy manipulation when the clamp is in position.
- Angled attachment hole allows the device to lie flat against the abdomen.
- Used with the SECUR shoulder strap to keep the ascender in position.
- For single ropes between 8 and 13 mm in diameter
- Certification: C E EN 567, CE EN 12841type B
- Individually tested
- Weight: 130 g
Ascension B17WRA – B17WLA – B17RN – B17LN
Handled rope clamp (right and left handed versions)
- Designed for ascending and occasionally for hauling (progress capture) Wide, ergonomic molded handle allows a comfortable yet powerfull grip.
- Lower holes for connecting a SPELEGYCA lanyard and installing a FOOTPRO footloop with a quick link
- Toothed cam with self-cleaning slot optimizes performance under any conditions (e.g. frozen or dirty ropes)
- Upper hole through which a caribiner attaches the device to the rope (useful for back-up belays or hauling)
- Comes in left and right handed versions: and in black versions:
– ASCENSION (B17 WRA): right-handed, yellow.
– ASCENSION (B17 WLA): left-handed, black.
– ASCENSION (B17 RN): right-handed, black grip.
– ASCENSION (B17 LN): left-handed, all black.
- For single ropes between 8 and 13 mm in diameter.
- Certification: CE EN 567, NFPA 1983 L, CE EN 12841 type B
- Individually tested
- Weight: 195 g
Ascentree B19 WAA
Double-handled arborist rope clamp
- Designed for ascending double ropes in trees using
- the footlock technique or with two PANTIN foot ascenders
- Ergonomic molded handle allows a comfortable yet powerfull grip.
- Cam is totally intergrated into the body of the rope clamp to prevent rubbing
- Large handles can be used with thick gloves
- Lower holes for connecting a SPELEGYCA lanyard and installing a FOOTPRO foot loop with a quick link
- Upper holes through which a caribiner attaches
- For use on ropes between 8 and 13 mm in diameter the device to theĀ rope (useful for back-up belays or hauling)
- Certification: CE
- Individually tested
- Weight 390 g